Stainless Steel Faucets Installation Steps

stainless steel faucets is a double-edged sword, because it gives us a lot of convenience, but at the same time there will be many failures, then how can we properly install the stainless steel faucet?

First, it is necessary to understand that the installation of a single-hole kitchen faucet should be stable. Since the kitchen faucet is often used, moving and moving, it is easy to loosen, so the lock nut must be tightened. The problem of source failure of the faucet has been fundamentally solved.

Secondly, pay attention to the diameter of the outlet when installing the faucet. Generally speaking, it is more suitable from the basin to 35 cm. When installing, be sure to choose a special angle valve. The angle valve must be fixed with the hot and cold water pipes of the wall socket.

Then, find the problem in time during the installation process and correct it immediately. For example, when there is a distance between the angle valve and the water pipe on the faucet, be sure to purchase a special extension tube for connection. Do not use other water pipes because if the water pressure is too high, it will easily fall off and leak water, causing damage. If the inlet pipe is too long to exceed the outlet, you can cut the part as needed. If the angle is not suitable, bend it to the position you need as needed.

Finally, do not bend to 90° or more. When installing a water basin to remove water, don't forget to buy a small interface for the faucet manufacturer's faucet. Don't forget to flush the water pipes buried in the wall before installation.



information about stainless steel faucets : https://www.afastainlesskb.com/product/stainless-s...