afastainlesskb
1 Attending
eDEEJAY is available on mobile devices.
Keep connected with us everywhere !
Keep connected with us everywhere !
Wednesday, July 10, 2019 10:55 am - 1:55 pm
Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
Yuyao
315450
China
Nowadays, there are a lot of people who will share their tips for cleaning up furniture. There is also a set of cleaning methods for stainless steel faucets . Let's take a look at the cleaning tips.
1. Before installing the faucet, you need to flush the water, wash the impurities in the water pipe, remove the sundries in the installation hole, install the faucet as much as possible after the completion of the painting project. If it is not used for a long time after installation, it is best to clean the faucet. The cloth is covered.
2, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface sand.
3, switch faucet should not use too much force, you can gently turn the trend, especially do not use the handle as a handrail to support or use.
4. The faucet should be wiped regularly to prevent the watermark from leaving after the water droplets dry.
5, the shower head metal hose of the faucet should maintain a natural stretch state, do not coil it on the faucet when not in use. At the same time, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
6. When the water volume becomes smaller after using for a period of time, please pay attention to cleaning the filter.
7. The stainless steel faucet is mainly sanding. The sanding surface can be sanded with scouring pad. This is not the same as ordinary copper faucet. Even if the faucet is scratched, it can be repaired with scouring pad. If there are rust spots on the surface of the faucet for other reasons, it can also be repaired by the same method.
8, stainless steel faucet cleaning tips, squeeze a little toothpaste on the stainless steel faucet, then gently brush with a toothbrush, rinse with water, use an old stockings to avoid light, and then use orange peel on the metal surface Once again (because the orange peel contains fruit acid to maintain the stainless steel jewelry), it will make it bright and new.
information about stainless steel faucets : https://www.afastainlesskb.com/product/stainless-s...
1. Before installing the faucet, you need to flush the water, wash the impurities in the water pipe, remove the sundries in the installation hole, install the faucet as much as possible after the completion of the painting project. If it is not used for a long time after installation, it is best to clean the faucet. The cloth is covered.
2, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface sand.
3, switch faucet should not use too much force, you can gently turn the trend, especially do not use the handle as a handrail to support or use.
4. The faucet should be wiped regularly to prevent the watermark from leaving after the water droplets dry.
5, the shower head metal hose of the faucet should maintain a natural stretch state, do not coil it on the faucet when not in use. At the same time, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
6. When the water volume becomes smaller after using for a period of time, please pay attention to cleaning the filter.
7. The stainless steel faucet is mainly sanding. The sanding surface can be sanded with scouring pad. This is not the same as ordinary copper faucet. Even if the faucet is scratched, it can be repaired with scouring pad. If there are rust spots on the surface of the faucet for other reasons, it can also be repaired by the same method.
8, stainless steel faucet cleaning tips, squeeze a little toothpaste on the stainless steel faucet, then gently brush with a toothbrush, rinse with water, use an old stockings to avoid light, and then use orange peel on the metal surface Once again (because the orange peel contains fruit acid to maintain the stainless steel jewelry), it will make it bright and new.
information about stainless steel faucets : https://www.afastainlesskb.com/product/stainless-s...